Supporting your non-metallic material testing requirements

Call us now on: +44 (0) 1404 549293

Composite Test & Evaluation Testing

Mechanical Testing

Testing can be performed to ISO, ASTM or your own specific specifications at a variety of temperatures from -60°C to 350°C

Mechanical Testing covered will include but is not restricted to:-

  • Tensile including modulus and Poisson’s ratio if required
  • Compression including modulus and Poisson’s ratio if required
  • In-plane Shear testing including modulus and Poisson’s ratio if required
  • Rail Shear including modulus and Poisson’s ratio if required
  • Interlaminar Shear
  • Flexural strength and modulus both 3 point and 4 point bending
  • Open Hole Tension / Compression
  • Bearing Strength
  • Climbing Drum Peel
  • Metal – Metal Peel
  • Single and double overlap shear
  • Flatwise tensile
  • Tube Testing
  • Heat Deflection Testing
  • Short Term Creep Testing

If your particular test is not included here please feel free to contact us to discuss your particular requirements.

We also offer test method development and custom test fixture design for non-standard tests